Note: These Steps specifically relate to the outdoor EZ Timer. For the regular timer, please see steps here.
Before you Begin
Plug in your timer and allow it to charge for 30 minutes before programming.
Basic Setup
Step 1: Set the Current Time
Use the up (↑) and down (↓) arrows to adjust the current time
Alternatively: Choose a Preset Option
Press one or more preset buttons that match your needs
The button will light up when activated (timer must be plugged in)
If the presets work for you, setup is complete!
Step 3: Custom Programming (Optional)
To set custom on/off times:
Hold "Custom ON" and use arrows to set the ON time
Hold "Custom OFF" and use arrows to use arrows to set the OFF time
Tap (don't hold) both "Custom ON" and "Custom OFF" buttons to activate
Buttons will turn blue when your custom program is active.
Additional Features
Countdown Timer
Press "CTD"
Use arrows to set countdown (1 minute to 24 hours)
LCD will flash "CTD" when countdown is active
Manual Override
Press "On/Off" to bypass current settings
Timer will resume normal programming at next scheduled cycle
Power Failure Information
During a power outage:
Timer continues operating on battery backup
Programming resumes when power returns
If power outage exceeds battery life, reprogram using steps 1-3