Note: These Steps specifically relate to the BSL outdoor Timer. For the EZ timer, please see steps here.
Video Guide
Key Features
Dual outlets for connecting multiple light sets
Internal battery backup to preserve settings
12-hour clock for simple programming
Handles loads up to 15 amps
Recessed red LED display
Programming Instructions
Step 1: Reset and Begin Programming
Hold down both buttons on the front of the timer until the display resets and begins flashing.
Step 2: Set Current Time
Use the top button to cycle through time options
A dot in the bottom right indicates PM
Press the bottom button to confirm your selection
Step 3: Set Power On Time (P)
When "P" appears, use the top button to select when you want lights to turn on
Press the bottom button to confirm
Step 4: Set End Time (E)
When "E" appears, use the top button to select when you want lights to turn off
Press the bottom button to confirm
Tips for Success
Double-check your AM/PM settings when programming
Test the timer before fully setting up your display
Place the timer in a location protected from direct water exposure
Even if there is a power outage, or the timer is unplugged, the internal battery will remember your last used settings.