Why Choose Big Star Lights Magnetic Clips?
Super Strong Magnets: Made with high-grade rare earth magnets for maximum hold.
Triple-Plated Protection: Finished with two layers of nickel and a layer of copper, keeping the clips corrosion-resistant and durable.
Quick Installation & Removal: Snap your lights up and take them down without hassle.
Proper Orientation and Applications
Fits C7 and C9 Wires: Magnetic clips work with both E17 & E12 Wire Types.
Positioning Options: Point straight out from the roofline or run along it (upwards or downwards), depending on your preference.
Check the Surface First:
The clips only stick to ferrous (magnetic) surfaces.
They won’t work on most downspouts or aluminum gutters.
Best used on flat roofs with metal flashing along the roofline.
How to Attach
Attach the magnetic clips to your light sockets.
Place the clips in a straight line along your metal flashing.
Stay consistent with placement (top or bottom of the flashing) for a neat, straight line and untwisted wires.
Pro Tip: Avoid Metallic Debris
Magnets can attract tiny metal shavings from shingles. Wipe the clips clean before installing to ensure they sit flat and secure.
Adding Extra Security: Use Multi-Clips
Why Add Multi-Clips? While magnetic clips are strong, if a few fall, the whole string could come down.
How to Use: Slide a multi-clip under the metal flashing and wrap it around your wire at intervals. This keeps your lights secure and distributes support.
Removal Made Easy
A light tug is all it takes to remove the clips.
Don’t pull too hard to avoid taking down your whole string.
Multi-clips should prevent accidental mass removal.
Stay Updated
For more tips and inspiration:
Subscribe to our YouTube channel
Follow us on Instagram
With these steps, you’ll have a safer, faster, and frustration-free light installation experience!