I. Control Box Specifications
Product Name: Chromaglow Pro Controller Box with Power Supply
Model No.: CGPRO-600W-PWRSPLY+CTRLR
Power: 600W
Input Voltage: AC 100–240V
Output Voltage: DC 48V
Dimensions: 300 × 200 × 170 mm
Ⅱ. Parts
Part Name | Image |
Smart timer |
|
Power supply |
|
Controller |
|
Power wire
|
|
Output connection |
|
III. Device Instructions
3.1 Smart Timer
The smart timer allows you to control the system manually or via the HRSYT app.
Press the MANUAL button to select ON, OFF, or AUTO mode.
Buttons & Ports:
Work Indicator Light: ON = power disconnected; OFF = power connected
Light On: The time-controlled switch circuit is open, and the Intelligent Time Controller is off.
Light Off: The time-controlled switch circuit is closed, and the Intelligent Time Controller is on, with the power supply connected and supplying 110V/220V normally.
SET Button: press to toggle power; hold 15s to reset
Press the SET button to turn the time control switch circuit on or off (no app connection is required). Press and hold the SET button for 15 seconds to restore the equipment to factory settings. After resetting, you will need to add the equipment again to continue use.
DC Output Port: 12V output (max 10W)
AC Input Port: accepts 110–220V AC
Switch Terminals: connect to system control circuit
Guide Rail Slot: Secures controller to control box to prevent movement or damage.
Using the Smart Timer:
Direct Control via the SET Button
Pressing the SET Button toggles the power circuit on or off. When the button is pressed and the WORK indicator light is on, the power circuit is disconnected and no voltage is output. Pressing the button again turns the WORK light off, indicating the circuit is active and supplying normal 110/220V voltage.
Remote Control via the HRSYT App
The time controller circuit can be controlled remotely through the HRSYT mobile app. The device is added by searching for it in the app (displayed as a socket icon), after which it can be managed directly from the main interface.
In addition, the intelligent time controller supports additional functions via the HRSYT mobile app:
Schedule: The primary function of the controller, Schedule allows timing settings to be configured for regular operation.
In the main interface, the Schedule setting appears at the bottom. The on/off times can be configured—for example, 9:15 daily (using a one-week schedule as a reference). At the set time, the socket will turn on or off automatically.
Cycle Function: The cycle can be set in the main interface under the “Cycle Task” module, specifying start time and durations for “ON” and “OFF” periods. If both Delay and Cycle functions are enabled, Delay executes first, followed by the Cycle function. Similarly, if Schedule and Delay are both active, Delay runs first, then Schedule executes as configured.
App Functions:
Schedule: Set daily on/off times.
Delay: Set a delayed start or stop.
Cycle: Program repeated on/off cycles. Delay executes before Schedule or Cycle functions.
3.2 Power Supply
Typical: 450W or 600W
Input: AC 100–240V
Output: DC 48V
3.3 Controller
The controller connects to a phone via Bluetooth and WiFi. It supports nine control chip types, covering nearly all chip models on the market. It can manage both RGB and RGBW lights, the only controller currently supporting both modes. A total of 2,048 lights can be controlled, organized into groups of up to 300 lights each.
Connects via Bluetooth/WiFi.
Supports 9 chip types, RGB & RGBW lights.
Max 2048 lights; groups ≤ 300 lights each.
3.4 Power Wire
Plug in to energize the control box and power the system.
3.5 Output Connection
Connect to the first string of lights; lights will illuminate automatically.
3.6 App
Download HRSYT App via QR code or app stores. Connect the controller to your phone and follow these instructions.
Basic Setup:
Register/login or continue as a guest.
Turn on the control box and phone Bluetooth/WiFi.
Add devices in the app.
Rename the device and assign a room.
Switches & Settings:
Master Switch button: Controls all lights.
RGB Switch button: Controls only RGB lights, leaving warm white unaffected.
Clicking the Setting icon opens the interface to configure the IC type, color calibration, and number of lights. Each segment can have up to 500 lights, with a total limit of 2,048 lights. These settings also apply to the Doodle function.
Adjust IC type, color calibration, and number of lights (≤500 per segment, ≤2048 total).
App Features:
Colourful: Adjust colors by segment or whole; gradient effects available.
Themes: Use preset categories or create custom themes.
Playlist: Sequence multiple effects; drag to reorder.
Doodle: Customize light colors and effects. Click the “+” sign to customize light colors and dynamic effects, then click Save. Ensure the number of lights matches the actual setup; otherwise, the effect may be incomplete. Adjust the number of lights in the Setting interface if needed
Melody: Music Mode. Lights react to the rhythm of music. Click Add Music to import a file or use the built-in music library.
Note: On iOS, music files must be downloaded to iTunes or imported from a PC. On Android, files must be downloaded directly to the phone.
MIC Mode: Uses the mobile or device microphone (voice-activated version only) to sync lights with the detected sound rhythm.
Schedule:
a) Automatically switch lights on and off according to the set time.
b) Select different lighting effects, colors, or themes when the lights turn on.
Link Function: Two devices can be combined into one group for App control. Press for 3–5 seconds and drag devices in the list to adjust lighting order.
Series: Lights operate sequentially across both devices.
Parallel: Lights operate simultaneously on both devices.
White: Adjust white light brightness.
Fun Games: Six interactive games are available: Small Piano, Sliding Meteor, Dropped Colors, Learn Colors, Shake, and Color Picker.
Small Piano: Lights respond to piano rhythms.
Sliding Meteor: Draw meteors on the screen; lights follow their paths.
Dropped Colors: Tap falling color blocks to match the lights.
Learn Colors: Match the on-screen text to the displayed light colors.
Shake: Lights respond to phone movement; a fixed or dynamic mode can be selected.
Color Picker: Lights replicate colors captured by the phone, either manually or automatically.
Scene Function: Customize lighting colors and dynamic effects within the scene interface according to personal preferences.
Create Smart: In the Smart interface, set up personalized scenes, such as wake-up/sleep routines, sunrise/sunset simulations, or custom DIY effects for devices and scenes.
Share: Generate family QR code for shared device control.
Click Profile to access the home management page. Select the home and open the family QR code, then click “…” in the upper-right corner to save the QR code.
Third-Party Voice Services: On the Profile page, select a voice platform (Alexa, Google Home, Yandex Alice) and follow the instructions to connect the device. Voice control activates once the connection is complete.
Note: Only WiFi-enabled devices support voice services.