Skip to main content

RGBWW 500W Controller & Remote - Setup Guide

Complete setup and operation guide for the RGBWW 500W Controller with remote, covering installation, remote programming, color themes, and safety guidelines.

Emma Sheldon avatar
Written by Emma Sheldon
Updated over a week ago

SKU: CTRLR-500W-RGBWW

Dimensions: 4.5" x 4.5" x 4.4", 2.205lbs


What's Included

  • 1x RGBWW 500W Controller

  • 1x RGBWW Remote


Assembly Instructions

Step 1: Remove the 500W Controller and Remote from packaging. Keep the original box for safe storage when not in use.

Step 2: Connect the coaxial end of the controller to your chosen coaxial light set or light cord. Ensure the connection is secure and fully tightened.

Step 3: Plug the power cord end of the controller into a UL-approved outlet or extension cord. Your lights may turn on immediately once power is connected.

Step 4: Test your remote control.

  • If your lights are off, point the remote at the controller and press ON.

  • If your lights are on, press STEADY to begin customizing.

  • Select your preferred color or theme button to adjust your display.

Pro Tip: To lock in a specific color or theme (preventing accidental changes), press the black button on the side of the controller once to lock. Press it again to unlock and choose a new color or theme.


Remote Control Setup

Step 1: Remove the Remote Control from its packaging.

Step 2: Reset the RGBWW light using the Remote Control:

  • Press the OFF button once.

  • Press the ON button once.

  • Press the STEADY button once.

Step 3: The Remote Control is now cleared and ready to accept new options.


Remote Control Functions

Power & Basic Functions

  • On - Turn lights on

  • Off - Turn lights off

  • Steady On - Solid color display

  • Wave Function - Wave effect

  • Chasing Function - Chase effect

  • Flashing Warm White - Flashing warm white

  • Flashing Out Function - Flashing out effect

  • Flashing Opal Function - Flashing opal effect

Individual Colors

  • Red Color

  • Green Color

  • Blue Color

  • Harvest Color

  • Berry Color

  • Aqua Color

  • Opal Color

  • Warm White Color

  • Multi Color

Themed Programs

Theme: Candy Cane

  1. Chase Red-White-Green

  2. Each color 3 seconds

  3. Red base, white flash

  4. Green base, white flash

  5. Purple base, white flash

Theme: Christmas

  1. Steady Red

  2. Steady Green

  3. Chase Red-Green

  4. Wave Red-Green

  5. Each color 3 seconds

Theme: Halloween

  1. Steady Purple

  2. Steady Yellow

  3. Chase Purple-Yellow

  4. Chase Purple only

  5. Each color 3 seconds

Theme: Glacier

  1. Steady Blue

  2. Steady Teal

  3. Chase Blue-White

  4. Blue base, white flash

  5. Each color 3 seconds


Care & Use

  1. Product is intended for indoor and outdoor use.

  2. Do not mount or place the product near gas or electric heaters, fireplaces, candles, or other similar sources.

  3. Do not use product outdoors in case of extreme weather conditions.

  4. Do not use this product for any other purpose than its intended use.

  5. Do not secure wiring of the product with sharp hooks or nails.

  6. Not intended for permanent installation.

Did this answer your question?